SEEC INT. AUDIO SYSTEMS, HIGH-END PRODUCER

SCIENTIFIC ESSENTIAL EQUIPMENT COMPANY SEEC INT. AUDIO SYSTEMS, HIGH-END PRODUCER SEEC INT. AUDIO SYSTEMS
PRODUCER OF HIGH-END AUDIO EQUIPMENT Click on the image for more information

You reach us by E-mail with: Seec Int. Audio Systems

Click above on one of the product-pictures for more information and a small round tour

For The Netherlands (Nederland):
SEEC INT. AUDIO SYSTEMS
LANGENAKKER 92
5731 JT MIERLO
THE NETHERLANDS
TEL. Mobile: +31 (0)622544611

Distributor for GERMANY Contact:
AUDIOSTONES HIFI
RICHARD-WAGNER STRASE 1
D 35516 MUNZENBERG/GAMBACH
GERMANY
TEL: +49 (0)6033-67966
You can reach AUDIOSTONES by E-mail with: Click Button

Thank you for showing interest in our products.
Audio equipment manufactured by SEEC is complying with the highest standard in high end audio equipment.
SEEC INT. AUDIO SYSTEMS started in 1988 with the development of advanced electronics specially designed for the reproduction of music for professional and semi professional users. The original concept now became reality and embodies pure listening pleasure.
"SEEC INT. AUDIO SYSTEMS" HAS, INVENTED, AS THE FIRST COMPANY IN THE WORLD, A NEW LOW OHMIC INTEGRATED STANDARD ?
Through time, a standard is used, say: The 47k Ohm input impedance and a low output impedance. This gave an increasing audio quality because noise levels were reduced to acceptable proportions. The changeover to standard 47k Ohm was practically spoken a good approach, but by no means a perfect solution. The most important advance is that all equipment no matter what brand can be connected to each other, and thus compatible. The cable reflection and phaseshifting inherent to this standard never found a fundamental solution. Besides the superior quality of our audio products, SEEC INT. AUDIO SYSTEMS has added a fully new uncompromised interlink-system to our program called the ASC-2 (Active Signal Cable/Interlink).
* This new Low Ohmic interconnection method designed by SEEC for professional applications, will now solve all these problems. It is both an interlink with BNC to RCA connectors of the same impedance. Higher driven energy levels are then an absolute requirement. In that combination this improvement will come to its full performance. The function and explanation of this system can be compared with the data exchange between computers in networks. If that system would not be that 50 Ohm, but the current audio standard, then it is nearly impossible to send data. A large impedance difference between "in" and "outputs" imp. will always result in phase-shifting and reflections no matter how expensive the cable. SEEC AUDIO SYSTEMS was determind to design a system for the better audio equipment "without" compromises. SEEC Low Ohmic interconnections can be seen as one of the best solutions to eliminate any form of dis behavour in the audio signals. The dynamic behaviour and accuracy is herewith strongly improved and signal losses are reduced to a minimum.

This type connector in combination with the right cable is used in the SEEC ASC-2 system to drive the ultra detailed audio signals. Also used in high frequency technology to aviod tedious reflections. Especially lovers of classical music will have the essence and full advantage of this superb system.

Go Back to the Top..Or ?

Copyright © 1997, SEEC INT. Software Castle by Kees van Haaren